This my favorite bang-for-your-buck accent wall idea! It’s only $36 for a 4’x8’ panel and there are so many ways you can use it. Linked here: https://liketk.it/4NWfZ Here are some frequently asked questions I have received about using this product. How did you install it? I used a cordless nail gun which I highly recommend. I nailed it into the studs. If the studs happen line up with the grooves you can nail in the grooves so the holes would be concealed. You can use a hammer and finish nails as well it just takes a bit more manpower. How do you join the boards? I nailed the panels as close as possible then filled the seam with white caulk. Is it renter friendly? Yes. If you nail it to the walls (not using glue) it can be removed easily and all you will need to do is patch the nail holes. Finish nail holes are pretty small. Does paint scratch off? You definitely need to use a good primer! It will ensure the paint adheres and doesn’t scratch off. I recommend bin zissner bullseye 123. I don’t recommend a 2 in 1 paint/primer. Can you use it in a location with water exposure? This is a personal choice, but I would only use it 1.) If there isn’t a lot of condensation build up 2.) Somewhere it doesn’t have direct water exposure like behind a sink. I would prime, paint, and add a coat of polyurethane and feel very confident in its durability. Do the boards warp over time? I have not had any issues with warping. Using nails and making sure the nails are in studs will ensure it stays in place. Typically studs are 16” apart, and I nailed vertically about every 8”. Thats a pretty strong hold to ensure no warping. . . . #diyhomeimprovement #homeimprovement #homeimprovementprojects #homeimprovementideas #homeimprovements #homeimprovementtips #homeimprovementproject #shiplapwall #shiplapaccentwall #accentwall #featurewall #shiplapwall #panelwall #diyaccentwall #shiplapwalls